جص عازل جاهز للخلط يحتوي على الأسمنت البورتلاندي والسيليكات الموسعة والمواد المالئة غير العضوية. يتم تعديله بإضافات غير ضارة بالصحة والبيئة وفقًا لتوجيهات الحشو الأوروبية ومتطلبات ISO وهو يفي بشروط العزل الحراري والصوت والحريق.
ذراع التسوية الخفيف المعزول
| المواصفات الفنية | الوصف |
| Packing | 50 L/Bag (±%02) |
| Appearance | White Powder |
| Application Temperature | -5°C+30°C |
| Application Thickness | 10 mm – 50 mm |
| Application Time | 45 Minute |
| Method of Application | Steel Trowel-Pump |
| First Drying | 1 Hour |
| Setting Time | 72 Hours |
| Fire Response Class | A1 |
| Theoretical Powder Consumption | 14-16 L/m²/cm |
| Dry Density | 240 Kg/m³ |
| Thermal Conductivity | 0,047 W / mK |
| Compressive Strength | CSII (2,2N/mm² |
| Water Vapor Permeability | 8 |
| Capillary Water Absorption | W1 |
| Adhesion Strength | 3,2 Kgf/cm |
| Sound Insulation (2cm Thickness) | 22 db/500hz |
| Fire Prevention (4cm) | F120 / 120 Minutes |
usage areas
It is used directly on the exterior walls of the buildings, columns and beams, on rough and fine plaster, brick, pumice bloc. Primer, must be used necessarily on concrete, gas concrete and painted surfaces.
surface preparatıon
Blistered paint and spaced plasters are scraped off the surface. 4-5 notches per 10 cm² press on painted surfaces. The application surface should be cleaned from dust. Priming must be done on painted surfaces.
applıcatıon
Laths that determine the thickness are adhered to the prepared surfaces. Between two laths, is filled with a steel trowel or plasterer trowel and gauged. Following the first dry (~ 1-2 hours later ), the slats are removed from the surface and the spaces are filled and the pattern is drawn. if is dry when touched, (12-24 hours later) decorative plaster is drawn. No foreign matter should be added to the prepared mixture. (Lime, Plaster, Cement, etc.)
applıcatıon detaıls
In manual application, it should be mixed with ~ 8-10 liters of water with low speed (400-600 rev/min) drill for 3-4 minutes. In machine application, it should be pumped to the surface by mixing with 8-10 liters of water in average. When the desired thickness is reached, it should be allowed to dry.
applıcatıon condıtıons
Application surface and ambient temperature should be above 5 °C. Considering excessive moisture loss at temperatures above 35 °C, mixing water should be increased and the surface should be kept moist by wetting for 1 day after the surface hardening phase.
ıssues to be consıdered
Avoid application under strong wind or sun. The time increases at low temperatures and the time decreases at high temperatures. It should not be applied on frozen, melting or freezing surfaces within 24 hours. Appropriate plaster mesh should be used at different material junctions and points where movement may be considered.
storage transport
Protect from frost, rain and other weather conditions. 70 Bags in 1 pallet is 3.500 L.
envıronmental ımpacts
Not classified as dangerous.