جص العزل الداخلي من Fixper Insulation هو جص جاهز عالي الأداء مصمم خصيصًا للتطبيقات الداخلية، ويوفر عزل حراري وصوتي وحراري استثنائي. يتكون من أسمنت بورتلاند و سيليكات موسعة و مواد مالئة غير عضوية، ويلتزم بتوجيهات المواد المالئة الأوروبية ومعايير ISO للسلامة البيئية والصحية. معزز بإضافات صديقة للبيئة، يعد جص العزل الداخلي من Fixper Insulation الخيار المثالي لتحقيق توفير الطاقة والعزل الصوتي والحماية من الحرائق في المنازل والمباني التجارية. يوفر هذا الجص أداءً ممتازًا وحماية دائمة، مما يجعله الخيار المثالي للبناء المستدام.
جص العزل الحراري الداخلي
| المواصفات الفنية | الوصف |
| Packing | 50 L/Bag (±%02) |
| Appearance | White Powder |
| Application Temperature | -5°C+30°C |
| Application Thickness | 10 mm – 50 mm |
| Application Time | 45 Minute |
| Method of Application | Steel Trowel-Pump |
| First Drying | 1 Hour |
| Setting Time | 72 Hours |
| Fire Response Class | A1 |
| Theoretical Powder Consumption | 14-16 L/m²/cm |
| Dry Density | 240 Kg/m³ |
| Thermal Conductivity | 0,047 W / mK |
| Compressive Strength | CSII (2,2N/mm² |
| Water Vapor Permeability | 8 |
| Capillary Water Absorption | W1 |
| Adhesion Strength | 3,2 Kgf/cm |
| Sound Insulation (2cm Thickness) | 22 db/500hz |
| Fire Prevention (4cm) | F120 / 120 Minutes |
usage areas
It is used directly on the exterior walls of the buildings, columns and beams, on rough and fine plaster, brick, pumice bloc. Primer, must be used necessarily on concrete, gas concrete and painted surfaces.
Surface preparation
Blistered paint and spaced plasters are scraped off the surface. 4-5 notches per 10 cm² press on painted surfaces. The application surface should be cleaned from dust. Priming must be done on painted surfaces.
Application
Laths that determine the thickness are adhered to the prepared surfaces. Between two laths, is filled with a steel trowel or plasterer trowel and gauged. Following the first dry (~ 1-2 hours later ), the slats are removed from the surface and the spaces are filled and the pattern is drawn. if is dry when touched, (12-24 hours later) decorative plaster is drawn. No foreign matter should be added to the prepared mixture. (Lime, Plaster, Cement, etc.)
Application details
In manual application, it should be mixed with ~ 8-10 liters of water with low speed (400-600 rev/min) drill for 3-4 minutes. In machine application, it should be pumped to the surface by mixing with 8-10 liters of water in average. When the desired thickness is reached, it should be allowed to dry.
Application conditions
Application surface and ambient temperature should be above 5 °C. Considering excessive moisture loss at temperatures above 35 °C, mixing water should be increased and the surface should be kept moist by wetting for 1 day after the surface hardening phase.
issues to be considered
Avoid application under strong wind or sun. The time increases at low temperatures and the time decreases at high temperatures. It should not be applied on frozen, melting or freezing surfaces within 24 hours. Appropriate plaster mesh should be used at different material junctions and points where movement may be considered.
storage transport
Protect from frost, rain and other weather conditions. 70 Bags in 1 pallet is 3.500 L.
Environmental impacts
Not classified as dangerous.