Cement Based 2K Waterproofing SET

FIXPER WATERBLOCKER It is a fully elastic waterproofing material with high adhesion capability, containing copolymer, cement and special additives, providing water impermeability.

Technicial Specifications Description
Packing Bag A+B Component  (±%02)
Appearance White Powder
Application Temperature -5°C+30°C
Application Thickness 10 mm - 50 mm
Application Time 45 Minute
Method of Application Steel Trowel-Roller-Brush
First Drying 5 Hours
Setting Time 24 Hours
Fires Response Class A1
Theoretical Powder Consumption 3 Kg/m²/3 3 mm
Compressive Strength CSII (2,2N/mm²
Water Vapor Permeability None
Capillary Water Absorption None
Adhesion Strength 5,2 Kgf/cm

FIXPER WATERBLOCKER is a special waterproofing product. Positive and negative surfaces can be insulated with the same product. It is easily applied on floors, terraces, pools, ornamental pools, interior surfaces with moisture and humidity, and on points that require many waterproofing.

The surface should be dry, clean, solid and free from dust, oil, dirt or materials that prevent adhesion should be removed from the surface, materials such as mortar and cement residues should be scraped off.

10 lt B Component is poured into a clean bucket. FIXPER WATERBLOCKER, component A is poured in 25 kg to cover the water surface. Wait for a few minutes. It is mixed by using a low-speed mechanical mixer until it reaches a homogeneous consistency. Depending on the consistency, 1 liter of water can be added. After mixing, the mortar is ready to use. It can be applied with a roller, brush or steel satin trowel. The mortar in the container can be used for about 1 hour.

FIXPER WATERBLOCKER; It is presented in craft bags of 25 kg net and with 10 kg of Latex.

It should be stored in its unopened original package, in a dry (maximum 60% relative humidity) and cool (temperature between + 5 C° and +25 C °) and its shelf life is 12 months.

For easy and safe application of the product, please refer to the Safety Data Sheet (SDS).