Satin Plaster

FIXPER SATIN PLASTER It is an under paint top coat finishing putty with high adhesion feature.

Technical Specifications Description
Packing 25 Kg/Bag
Appearance White Powder
Application Temperature -5°C+40°C
Application Thickness 1 mm – 5 mm
Application Time 45 Minute
Method of Application Steel Trowel
First Drying 3 Hours
Setting Time 8 Hours
Fire Response Class A1
Theoretical Powder Consumption 1 Kg/m²/ 1 mm
Compressive Strength CSII (5,2N/mm²
Water vapor permeability None
Capillary Water Absorption None
Adhesion Strength 7,2 Kgf/cm

FIXPER SATIN PLASTER is a special putty. Fixper can be applied on interior surface filler plaster or plastered surfaces, as well as on gross concrete black plaster or cement based different filling surfaces.

The surface should be dry, clean, solid and free from dust, oil, dirt or materials that prevent adhesion should be removed from the surface, materials such as mortar and cement residues should be scraped off.

6.5 - 7 liters of water is poured into a clean bucket. FIXPER SATIN PLASTER is sprinkled up to 10 kg to cover the water surface. Wait for a few minutes. It is mixed by using a low-speed mechanical mixer until it reaches a homogeneous consistency. After mixing, the mortar is ready to use. The mortar in the container can be used for about 1 hour.

FIXPER SATIN PLASTER; It is presented in craft bags of 25 kg net.

It should be stored in its unopened original package, in a dry (maximum 60% relative humidity) and cool (temperature between + 5 C° and +25 C °) and its shelf life is 12 months.

For easy and safe application of the product, please refer to the Safety Data Sheet (SDS).